Tuesday, May 3, 2011

Printing Blanket Problems and Trouble shooting...!

1.Problem - Area of Weak Print

Cause:
Improper Bearer pressure. Packing Damaged.
Blanket Smash
Insufficient packing or back cylinder pressure
Low spot in cylinder
Plate Blinding

Corrective Action:
Check for smashed area and blanket and/or packing. Also try adjusting back cylinder setting.
Check blanket height, repack or replace.
Press condition…over pack or spot pack.
Check plate to blanket squeeze
Remake plate

2. Problem-Bar Pull Off/Out

Cause:
Over tensioned blanket.
Improperly applied bar.
Incorrect bar used.
Improperly installed into cylinder reel rod.
Out of square blanket.

Corrective Action:
Check means of tensioning and calibration of equipment.
Over/under specified mounted thickness.
Insufficient epoxy width or thickness.
Check press listing and bar dimensional specifications.
Check for bent blanket bar legs.
Check for unequal gap bend marks on back of blanket.
Check for contaminated cylinder reel rod and clean if necessary.
Check squareness of blanket.

3.Problem- Delamination

Cause:
Solvent attack.
Excess blanket squeeze.
Ink build up on edges.
Blanket edges not sealed.

Corrective Action:
Obtain samples of blanket wash and ink with MSDS and send to lab for evaluation.
Check back of blanket for excessive use of wash.
Check surface of blanket for face cuts that would allow solvent to attack cement.
Check packing pressure.
Use mourning bands.
Undercut packing.
Seal edges.

4. Problem- Dot Doubling

Cause:
Loose blanket.
Excessive squeeze.
Excessive ink feed to achieve density.
Film/plate movement during exposure.

Corrective Action:
Retension blanket, incorrect installation.
Reduce plate to blanket packing or blanket to impression cylinder setting.
Decrease ink/water amounts.
Change to more ink receptive blanket.
Check dots on plate.

5. Problem-Dot Grain

Cause:
Ink form rolls set too tight.
Ink form rolls too soft.
Low ink viscosity or tack.
Poor ink/water balance.
Ink has too much water pickup.
Excessive squeeze.
Fountain solution temperature too high.
Incorrect fountain solution pH.
Under/over exposed plate/film.
Improper blanket surface.

Corrective Action:
Replace with high viscosity ink or increase tack.
Adjust press speed.
Reduce amount of ink and water.
Have ink checked by ink supplier.
Reduce plate to blanket squeeze.
Reduce blanket to impression cylinder setting.
Reduce temperature to 55 to 60 degrees F.
Adjust solution pH to read between 3.5 to 5.0.
Check dot size on plate and re-make if necessary.
Change to more compatible blanket.

6.Problem- Embossed Blanket

Cause:
Blanket swollen due to excessive pressure, very high ink tack, or lack of cleaning with proper blanket wash.
Solvents in ink may affect blanket (UV inks for example)

Corrective Action:
Check blanket thickness and packing. Use quality blanket wash and clean blankets on a regular basis.If blanket is old, change to a new blanket, or one that works better with your inks.
UV inks and washes can often swell blankets. Try a UV compatible blanket.

7. Problem-Ghosting

Cause:
Ink form rollers starved for ink
Job layout causing problem
Ink/water balance issue

Corrective Action:
Not a blanket issue. Check roller settings, run a thicker ink film with minimum of water.
Job layout often contributes to the problem…change direction of run or general layout if possible.

8. Problem-Loss of Print at Gap

Cause:
Blanket over-torqued. Packing incorrect.
Packing slipped
Press out of phase (timing issue)

Corrective Action:
Insure proper packing of blanket and use torque wrench to tighten to press manufacturer specs. Check torque wrenches for accuracy.
Some print length problems are due to cylinders being out of phase. Check cylinder timing to print length.

9. Problem-Mottled Print

Cause:
Running too much water.
Blanket surface contamination.
Incompatible blanket style with fountain solution.
Excessive fountain solution temperature.
Excessive water absorption of paper.
Partially blind image on plate.
Using course grain plate.
Improper ink/water balance.
Not enough squeeze.

Corrective Action:
Reduce the amount of water.
Inspect surface of blanket for glaze, shiny steaks or spots, excessive talc, etc., clean with solvent and rinse with water.
Change type of blanket used or type of fountain solution.
Reduce temperature to 55 to 60 degrees F.
Contact paper supplier.
Remake plate
Change to finer grained plate.
Adjust balance.
Adjust packing.

10. Problem-Piling---Ink

Cause:
Most frequently an ink problem (ink too short and not water repellent), fountain solution PH or conductivity wrong, or rollers set wrong & heat building up.
Blanket underpacked

Corrective Action:
The blanket is least likely to be the cause of ink piling even though the ink piles on the blanket. If blanket-related, it is generally due to insufficient packing. Verify proper packing and nip pressures. Check ink feed, roller settings and set to minimum, check fountain solution PH & conductivity.

To be continued....!

24 comments:

  1. Hey Yogi! Nice post. There's not enough of this stuff online for web or sheetfed printers. Good useful stuff. Thanks.
    The Offset Printing Guru

    ReplyDelete
  2. The blog is really informative and i like to share it with my friends.I love to come back on a regular basis, please post more on the subject.Your posts are simply fabulous and inspiring . Thanks for the inspiration!

    Printhead911

    ReplyDelete
  3. Hello Yogesh,
    This post that is shared by you is very helpful and informative. Kyocera Mita Canada

    ReplyDelete
  4. Nice post thanks,printline systems is doing all types of C.T.P and Offset Printing Bangalore please call us on 8150936999 4color printers in Bangalore and offset printers in Rajajinagar

    ReplyDelete
  5. This blog is really effective avoid blanket problem such a great blog thanks for sharing...
    http://www.americas-press.com/san-antonio-printing-service/

    ReplyDelete
  6. This article is big help for offset printing, continue to write more helpful tips

    ReplyDelete
  7. As we are the best ph Water supplier in San Antonio, we can meet your individual or bulk requirement and assure:
    Good taste & Maximum convenience &Utmost product quality

    ReplyDelete
  8. I have been reading your posts regularly. I need to say that you are doing a fantastic job. Please keep up the great work.
    Offset Printing

    ReplyDelete
  9. Great explanation of offset printing blanket problems and troubleshooting.According to a new original research study from the Graphic Arts Technical Foundation (GATF)in cooperation with seven blanket manufacturers on blanket variables, proper torque affects print quality the most.

    ReplyDelete
  10. Hi, this Blog is very very usefull Imformation , We Import of Used Offset Printing Machines in India.

    ReplyDelete
  11. How can we control expension in cyan only in cromoman 50.manroland

    ReplyDelete
  12. DIC India is exporter & manufacturer of sheetfed offset inks. DIC India is one of best key players in the ink industry according to offset printing ink market reports.

    ReplyDelete
  13. DIC India a leading ink manufacturer of printing inks, coatings and supplies, pigments, polymers and liquid compounds. DIC India is focusing on upgrading their manufacturing plants in India leveraging their global network.

    ReplyDelete
  14. Yes i am totally agreed with this article and i just want say that this article is very nice and very informative article.I will make sure to be reading your blog more. You made a good point but I can't help but wonder, what about the other side? !!!!!!Thanks Web Design San Diego

    ReplyDelete
  15. DIC India ltd manufactures and supplies the all kind of printing ink for packaging and its inks are supplied throughout the world and listed for top ink manufacturer company in india. Its inks for newspapers and magazines are exported throughout the all over india.

    ReplyDelete
  16. DIC India Limited is one of leading manufacturers, supplier and exporter of printing ink in India. It targets the chief market players in leading regions with sales, volume, and profit earned over the forecast period 2019 to 2024.

    ReplyDelete
  17. In UV printing our blankets get damaged after 2lacs or before what is soution?

    ReplyDelete
  18. DIC India Limited is only best UV printing ink manufacturer in india and uv inks of DIC India performs better on printing machine than other company inks.

    ReplyDelete
  19. Offset Printing is a widely used

    commercial printing technique that produces consistent and high quality printed materials.
    As

    a general rule, this technique is used for production runs of 1,000 or more pieces. The offset

    printing method is also commonly used for gang or combo runs

    ReplyDelete
  20. Remedium Enterprises is proud to be able to supply today’s Offset printers with the highest quality printing blankets. Our UV Blankets are perfect for most applications, such as: paper stock, boxes, newspaper, commercial printing, card stock, and much more. Contact Us: +91 9911005177

    ReplyDelete
  21. Continental blanket with top quality

    ReplyDelete
  22. Please select only the top quality Continental blankets-Sandeep Gupta, continental india

    ReplyDelete